Product Description
Mr Beams Intelligent LED Battery-Operated Lights
Mr Beams MB980 Motion Sensor LED Ceiling Light
Attach a ceiling light anywhere: in your closet, stairway, attic, basement, utility room, porch, gazebo, garage or shower. Mr Beams offers simple installation with no wiring and no electrician needed.
Weatherproof
Tight seals and weather-resistant materials allow a Mr Beams ceiling light to work in all weather conditions.
Auto Shut-Off
Mr Beams anywhere ceiling light turns off automatically after 30 seconds of no motion, conserving battery life.
View larger
Motion Sensor Activated
The ceiling light instantly turns on when it detects motion, and can detect motion from as far as 20 feet away with a of field of motion detection optimized for ceiling mount application.
Bright LED Light
The bright power LED provides 100 Lumens of bright white light. A custom optical design is used to intensify the light by focusing it where it is needed.
Durable, Energy-Efficient LED
The bright LED never needs replacing--it's so efficient that you will get more than 3,200 activations on one set of batteries.
Recommended Applications
The MB980 from Mr Beams is a battery-powered, wireless, motion-sensor LED ceiling light that requires no wiring. Simply insert batteries and attach to any surface. A built-in photocell acts as a dusk to dawn sensor activating the motion sensor only after the sun has set or in a fairly dark room. These are fantastic bright indoor and outdoor lights for closets, stairways, attics, basements, utility rooms, porches, sheds, garages or showers. The MB980 is weatherproof for year-round illumination. Attach these ceiling lights anywhere in minutes without an electrician.
Indoor and Outdoor Lighting Solutions
Mr Beams LED lights provide indoor and outdoor lighting solutions where you need them most. Intelligent motion-sensors activate battery-operated LED lights for hands-free lighting. All units are IP44 rated, which means the weatherproof design will satisfy both indoor and outdoor LED light applications. All Mr Beams LED lights install easily--no wiring, no electricians--so you can be assured of quality LED lighting anywhere.
Tips on Operation
The MB980 Motion Sensor LED Ceiling Light has a photocell inside that activates the LED when it is somewhat dark to conserve battery life. This is often referred to as a "Dusk-to-Dawn" sensor because if it is used outdoors, it will start to work early in the evening through to the morning when it starts to get light out. When installed indoors the MB980 should be installed in a space that is fairly dark. It does not have to be complete darkness as the light sensor will enable the light if the detected light level is low (with a light intensity below about 3.5 lux at the light).
To test the MB980 before installation or at any time, it's recommended to put fresh batteries in and take it into a dark room. Leave the room to avoid your motion retriggering it. The light should shut off after a minute or two if the light is working properly (the motion sensor may need time to settle immediately after putting the batteries in). When you walk into the room, the motion sensor should trigger turning the light on.
What's in the Box?
Mr Beams MB980 motion sensor LED ceiling light, mounting plate, 2 screws, 2 mounting anchors, user manual. Runs on 4 C batteries (not included).
