Tutorials - Production - Vox Clever

If you record vocals in a small, untreated room, the chances are that the resulting sound will be boxy, so place your mic somewhere near the centre (but not exactly in the centre) of a larger room and put up improvised screens (sleeping bags, duvets, blankets and so on) where necessary to kill the reflections. Used in this way, virtually any respectable mic will give you good results providing you use a pop shield. You can also record acoustic guitars in the same environment.

Vocals invariably need compression, but what kind and how much? Listen to what you've recorded and try to establish how much variation there is in the vocal level. If you hear a lot of fluctuation it might be better to use a model of compressor that can pin down the level without changing the sound too much. The compressors that come as standard in Yamaha digital mixers are good for this, as you can really pile on the gain reduction without changing the sound too radically; there are also analogue models that can do the same. On the other hand, you may feel the vocals need thickening as well as levelling, in which case a compressor with a character of its own might be better suited to the job. Tube and 'opto' compressors generally produce the fattest sounds, and of course there are software plug-ins that emulate just about anything you can buy in a rackmount box.

The goal is to get the vocal sitting nicely with the backing track so that you don't feel the urge to turn it up or down in different parts of the song. Professional engineers may also spend some time fine-tuning vocal levels with their mixer automation systems, and if you use either a digital mixer or a computer-based recording system you can do the same.

Added by - Looperman

Date - 2006-05-16 18:36:48

Viewed - 5522 times

As the tutorials here have been passed on by our members or had no author information we can not be sure of their origin. If you know the original authors or feel the content of this tutorial breaches any copyright issues please contact us.

Back To Tutorials