Chicago and North Western Railway Company - Illinois 1939

Beautifully engraved specimen certificate from Chicago and North Western Railway Company dated 1939. This historic document was printed by American Bank Note Company and has an ornate border around it with a vignette of an angel flying in the clouds with a wheel with wings. This item is over 67 years old.


Certificate Vignette

The Chicago and North Western Railway (AAR reporting marks: CNW, CNWS, CNWZ; unofficial abbreviation: C&NW;) was a Class I railroad in the United States. It was also known as the North Western.

The Chicago and North Western Railway was chartered on June 7, 1859. It had purchased the assets of the bankrupt Chicago, St. Paul and Fond du Lac Railroad five days earlier. On February 15, 1865, it officially merged with the Galena and Chicago Union Railroad, which had been chartered on January 16, 1836. Since the Galena & Chicago Union started operating in December, 1848, and the Fond du Lac railroad started in March, 1855, the Galena and Chicago Union Railroad is considered to be the origin of the North Western railroad system.

The North Western had owned a majority of the stock of the Chicago, St. Paul, Minneapolis and Omaha Railway (Omaha Road) since 1882. On January 1, 1957, it officially leased the company, and merged it into the North Western in 1972. The Omaha Road's main line ran from an interchange with the North Western at Elroy, Wisconsin, to the Twin Cities, down to Sioux City, Iowa, and then finally to Omaha, Nebraska.

Image:OP-3395.jpg Chicago and North Western 4-8-4 #3003 leads an eastbound freight train in Cortland, Illinois on July 17, 1953 during the Everett Dirksen era.The North Western picked up several important short railroads during its later years. It finalized acquisition of the Litchfield and Madison railroad on January 1, 1958. The Litchfield and Madison railroad was a 44-mile bridge road from East St. Louis to Litchfield, Illinois. On July 30, 1968, the North Western acquired two former interurbans – the 36-mile Des Moines and Central Iowa Railway (DM&CI;), and the 110-mile Fort Dodge, Des Moines and Southern Railway (FDDM&S;). The DM&CI; gave access to the Firestone plant in Des Moines, Iowa, and the FDDM&S; provided access to gypsum mills in Fort Dodge, Iowa.

On November 1, 1960, the North Western acquired the rail properties of the 1,500-mile Minneapolis and St. Louis Railway. In spite of its name, it ran only from Minneapolis, Minnesota, to Peoria, Illinois. This acquisition provided traffic and modern rolling stock, and eliminated competition.

On July 1, 1968, the 1,500 mile (2,400 km) Chicago Great Western Railway was merged into the North Western. This railroad went from Chicago to Oelwein, Iowa. From there, separate lines went to the Twin Cities, Omaha, Nebraska, and Kansas City, Missouri. A connection from Hayfield, Minnesota, to Clarion, Iowa, provided a Twin Cities to Omaha main line. The Chicago Great Western duplicated the North Western's routes from Chicago to the Twin Cities and Omaha, but went the long way. This merger provided access to Kansas City, Missouri, and eliminated competition. After abandoning a plan to merge with the Milwaukee Road in 1970, Benjamin W. Heineman, who had headed the CNW and parent Northwest Industries since 1956, arranged the sale of the railroad to its employees in 1972. The words "Employee Owned" were part of the company logo in the ensuing period.

C&NW; #8540 at Shawnee, Wyoming.After the Chicago, Rock Island & Pacific Railroad (Rock Island) stopped operating on March 31, 1980, the North Western won a bidding war with the Soo Line for purchase of the roughly 800-mile "Spine Line" from the Twin Cities to Kansas City, Missouri, via Des Moines, Iowa. The North Western's bid of $93 million was approved on June 20, 1983, by the ICC. The line was well-engineered, but because of deferred maintenance on the part of the bankrupt Rock Island, a major rehabilitation was undertaken in 1984. The North Western then began to abandon the Oelwein to Kansas City section of its former Chicago Great Western trackage, which duplicated Spine Line service.

In April, 1995, the Chicago and North Western Transportation Company was merged into the Union Pacific Railroad.

Chicago and North Western locomotives continued to operate in their paint schemes for several years after the merger. As of June 22, 2006, only two engines were left in full C&NW; paint (C&NW; 8646 and 8701), but many others were wearing "patch" Union Pacific numbers over their C&NW; scheme.

Union Pacific continues to follow its new tradition of releasing "Heritage" units to represent the paint schemes of companies absorbed by UP. After completion of painting at the Wisconsin & Southern Railroad's Horicon, Wisconsin shop, Union Pacific 1995, an EMD SD70ACe locomotive painted in a "Heritage" Chicago & North Western paint scheme, was unveiled on July 15, 2006, at Ogilvie Transportation Center in Chicago, IL. OTC is the former North Western Station now serving as UP's Metra terminus. The unit was then placed in dedicated service on the former C&NW; main line, paired with the C&NW; 8646 and 8701.

Chicago and Northwestern operated some notable passenger trains, including the City of Los Angeles, City of Denver, and the Challenger. All three lines were jointly operated by CNW and the Union Pacific Railroad from 1936 until 1955, when poor track conditions on the CNW forced UP to switch to the Milwaukee Road for service to Chicago.

Train No. 107, the Challenger, is led by a Chicago and North Western Railway EMD E8 locomotive as it passes east of Ames, Iowa on November 23, 1954.The CNW's most famous train, the Chicago-Twin Cities 400 was introduced in 1935 to compete with the Chicago, Burlington and Quincy's Zephyrs and the Milwaukee Road's Hiawathas. This train was named because it traveled the 400 miles between the cities in 400 minutes. CNW was the first system to start a high-speed Chicago-Twin Cities schedule because it used refurbished instead of new equipment, but in 1939, modernized the 400 with new E3A diesel locomotive pairs and streamlined cars.

CNW eventually renamed the first 400 to the Twin Cities 400 as the CNW stuck almost all of its passenger trains with the 400 moniker, including the Flambeau 400, Rochester 400, and the Kate Shelley 400. CNW ceased running the Twin Cities 400 in 1963, and all intercity passenger service on CNW ended with the formation of Amtrak in 1971.

The CNW was known for running "left-hand main" on double track mainlines. In other words, traffic was routed by default to the track on the left rather than the track on the right. In the United States, most railroads followed the "right-hand main" operating practice, while "left-hand main" running was more common in countries where automobile traffic drove on the left as well. According to a display in the Lake Forest station, the reason for this was a combination of chance and inertia. When originally built as single-line trackage, the C&NW; arbitrarily placed its stations on the left-hand side of the tracks (when headed inbound toward Chicago). Later, when a second track was added, it was placed on the side away from the stations so as not to force them to relocate. Since most passengers waiting at the stations were headed toward Chicago, the inbound track remained the one closest to the station platforms. The expense of reconfiguring signals and switches has prevented a conversion to right-hand operation ever since.

The railroad also purchased a great deal of its equipment second-hand. CNW shop forces economized wherever possible, earning the railroad the nickname "Cheap and Nothing Wasted."

Finally, the CNW has a following of more than 3,000 members of the Chicago and North Western Historical Society.

---

About Specimens

Specimen Certificates are actual certificates that have never been issued. They were usually kept by the printers in their permanent archives as their only example of a particular certificate. Sometimes you will see a hand stamp on the certificate that says "Do not remove from file".

Specimens were also used to show prospective clients different types of certificate designs that were available. Specimen certificates are usually much scarcer than issued certificates. In fact, many times they are the only way to get a certificate for a particular company because the issued certificates were redeemed and destroyed. In a few instances, Specimen certificates we made for a company but were never used because a different design was chosen by the company.

These certificates are normally stamped "Specimen" or they have small holes spelling the word specimen. Most of the time they don't have a serial number, or they have a serial number of 00000. This is an exciting sector of the hobby that grown in popularity over the past several years.

History from Wikipeida and OldCompanyResearch.com.